Easy-Run clients tell us we have done our home work. We would like to share some of their comments. Easy-Run's clientele range from the largest corporations to the home hobbyist.

Video's

Easy-Run: save: Time, Money and Aggravation:
                         Test Run, Heat Cycle, Check for Leaks,re- tighten and Certify before you Install

Chrysler Hemi:    http://www.youtube.com/watch?v=CKfy7yXGMxs&feature=channel

Ford: 427 side oiler: http://www.youtube.com/watch?v=5SLhJ5stqIg&feature=channel
 
                                    http://www.youtube.com/watch?v=zxnNm6cE-Qo&feature=channel

Division of Ford Motor Racing: Detroit, Michigan

We looked at building a Run Stand in our Ford Race facility, one of our employees showed us a picture of the Easy-Run Engine Test Stand, we realized we could not build a run stand that would be comparable in quality, appearance and be as universal for what we could buy your stand.
We also would need time to engineering and fabricate. We did not have the time to complete that type of project.  My technicians were amazed how easily they were able to complete the fuel injection and computer wiring conversion to the Easy-Run. It worked perfectly.

Thank you for helping us with the Easy-Run Engine Test Stand. We used it for our mobile display all over the country, it was very easy to load into our trailer and performed flawlessly all year. The 4.6 High Performance Engine display is a big attention getter for our display and the crowd loved it.  Thank you for the fast delivery and the help your team provided.

John V.
Head of Ford Racing. Detroit, Michigan.










Hot Rod Magazine: April of 2009 issue

Hot Rod and Car Craft needed a Run Stand for their project garage in Gardena, Ca. They visited with Easy-Run at the Pomona Grand National Roadster show in Janruary of 2009. They were sold on the Universal application, Versatility, Quality and Professional appearance.

They were so appreciative, they did a full page article about the Easy-Run.

Quote: "What really impressed us was the Quality Construction from end to end from the Welds to the Wiring. Its Top shelf.
They say "the Easy-Run is for the Professional but user friendly for the home builder."





Sam Memmolo of 2 Guys Garage Fame was so impressed by the Easy-Run that he decided he needed the Professional Series in his personal garage. here Sam is test running a 472 Cad and a Turbo 400 trans combination. Built for the Professional but user friendly for your shop.






Message from Kevin date 01-22-10

“hi guys, just thought I'd let you know the stands maiden voyage was a 383 stroker, it was fantastic, a very well put together product, the stand made the whole process go so easily, it will be a well used asset for years to come!! One question, if I hook an alternator to charge the battery will this harm the dash electronics, (no regulator??)? Thanks again”
  Kevin Skarbo
  Male Ridge, BC  Canada
Dear Al
Easy Run Engine Stands
March 6, 2010


We are very happy with the Easy Run Engine Stand we bought in 2009. Great quality and shipping. We used it for a small block Chevy engine and worked awesome. We build motors for floor stock and it saves us huge in time and money. It's nice to let the customer hear the engine run before we let it leave the shop and that saves us another dyno fee of $500.00. We would recommend this Stand to any engine  building shop. It helps us move our products, such as carburetors, electric water pumps, fuel systems, starters, because we can show them actually being used.
We've been in business since 1981 and this is the best money we've spent on a tool for our shop.

Thank you very much,
R&D Racing Engines Inc.
President
Rich Desbiens






“I'm Ron Frederick from Joliet, IL. and I just wanted to let you and everyone else know how much time and money this stand has saved me, it allows you to easily install all your engines and run them to check for problems, which I had a front pan leak and a intake leak which I was able to see and repair without putting it in the car and have this happen and have to pull it back out. I have run the engine again and have no problems now . This unit is easy to set up and if you do have a problem Al is more than happy to walk you thru to get you up and running. I looked at other run stands before I decided to buy this one , they do not even come close to these stands and Easy-Run is made in the USA not overseas. I highly recommend Easy Run stands and the staff. Again Thank You for a great product , fast shipping , and all the support. Ron Frederick Joliet, IL. PS. I now have 3 other engines to run after my friends have seen my running on the stand.”


Jory at S.O.S Marine said “Wow, this Run Stand is amazing, It handled this 632 Merlin Big Block Chevy horsepower and was very stable. I’ve been a fabricator for a long time and for the price they are selling this stand, I can’t build one as nice as this. Mine looks hoaky compared to this. What a deal. I can’t believe how easy we loaded the engine and fired it. I know we can run a full blown motor with no problem.” Every engine shop, boat shop and resturation shop should have one. It will pay for it self the first time you don't have to pull the engine back out, trust me.
thanks Easy-Run for a great run stand. Jory.


Bruce and Dan, at the Mustang Market restoration shop in Riverside said “We will never install an engine again without first running it on our Easy-Run. We learned the hard and expensive way, we can’t afford to take the risk! After seeing how easy it is to install, hook up and test, you have to be crazy to take the chance of having a problem. Mustangs are labor intense and the risk of  doing damage during a second R/R, well we will never do that again. Trust me, this stand is very universal, easy to use and we move it all over the shop. Our thanks to the Easy-Run guys for a great product, you have saved us a ton of time and money. Thanks, Bruce, Dan and both Tom’s”


Hi Al,
 
Just got my engine onto the Easy Run engine stand and have found the design and strength to be exceptional. Also very easy to move this 700 lb engine around the garage. The versatility of being able to adapt it to different types of engines will certainly be appreciated as I restore a number of different types of vehicles, including muscle cars and street rods. Ensuring that the engine runs properly before installing it into a vehicle is paramount for me because the cars are detailed to the 10's and having to take an engine out because a cam lobe went flat would be a disaster in these detailed vehicles. I have only to turn the key knowing that it will run perfectly from the start.

In short having only 1 engine failure and the stand has basically paid for itself. .
I would also like to say thanks for all the tips and how-to's on getting the engine to fire-off immediately and the break in process. The customer service and support was great! Addressing all the customs and brokerage issues certainly went above and beyond. Thank-you very much!

Don Sangster, Regina, Canada



 

 


Video's
Video's